First picture PreviousLatest Entry Next Last picture
Click to Enlarge

Nope, we are not repeating photos! This is a very different photo: Here, the canoe is installed with structural epoxy!

We used clecos for the first step of attaching it. � (We had to find the cleco holes on the wing, as we had applied structural over them....) � Then we put the jig back in place. It looked good all the way around, and we had lots of structural ooze out when we "clamped" it in place. We cleaned up most of the excess to reduce the sanding effort.

7/9/2018   Picture 314

** Click picture for large version